LPQ 475 Line Impact Cabinet Printer

Name: LPQ 475 Line Impact Cabinet Printer
Brand: HP
SKU: C3202A
Availability: InStock
Rating: 4.7 (6 reviews)

Manufacturer: HP

Part # C3202A

Availability: IN STOCK

Write a review

REFURBISHED 90 days Warranty

Product Description
Review

Standard Features

All of the printers offer a wide range of horizontal and vertical dot densities, operate quietly, and can load an emulation very easily. Other features are specified in the following sections.

Host Computer Interfaces

The following host computer interface choices are available:

Centronics
RS-232 serial interface
RS-422 serial interface
Bi-Tronics
Ethernet (optional)

Printer Emulations

The following printer emulations (or protocols) are selectable at the control panel:

HP PCL-II (the default)

LP Plus, which consists of:

Printronix P-Series

Epson FX-1050

IBM Proprinter III XL

Code V (optional)

Each emulation provides a different set of configuration menus, control codes, and character sets.

Graphics and Vertical Formatting

Several graphics and vertical formatting features are available:

Built-in graphics generators:

IBM Proprinter III XL bit-image graphics
Epson FX-1050 dot graphics mode
P-Series Plot
PCL raster graphics

Programmable electronic vertical formatting provides rapid vertical paper movement to specified lines for printing repetitive and continuous forms. You can choose from the following methods:

Vertical tabbing in Proprinter III XL and Epson FX emulation modes
Electronic Vertical Format Unit (EVFU) in P-Series emulation mode
PCL vertical forms control (VFC)

Built-in Diagnostic Tools

The following diagnostic tools are provided with the printer:

Comprehensive diagnostic self-tests permanently stored in the printer
Configuration printout
Data stream hex code printout
Symbol set printout

LP Series Printers	Model	Print Speed	Housing	Data Controller	Hammer Bank
LPQ 475	C3202A	475 (LPM)	Cabinet	25 MHz	28 Hammers

Printer Evolution

The following models have been added to the LP Series:

• LP 500 (Model C3201C)

• LPQ 500 (Model C3202C)

• LPQ 1000 (Model C3204C)

• LPQ 1500 (Model C3205C / C5640C)

These "C" model printers have a redesigned shuttle frame assembly and hammer bank which are not compatible with earlier models. These models also must use the CMX 040 controller board, which has a 40 MHz clock speed for the Data Controller unit. (The CMX 040 controller board can be installed in earlier model LP printers, but must be used in the new models.)

Printing speed is determined by the interaction of many variables. The speeds listed in the table above are the highest speeds attainable under certain conditions.

The microprocessor of the Data Controller unit on the CMX controller board runs at 25 MHz or 40 MHz, depending on printer model. This means there are two kinds of CMX controller board for these printers, used as indicated in the table above. The 40 MHz controller board, however, is backwards compatible with all models that use the 25 MHz board.