Printek FormsPro 4600 Dot Matrix Printer

Name: Printek FormsPro 4600 Dot Matrix Printer
Brand: Printek
SKU: 92370
Availability: InStock
Rating: 4.5 (4 reviews)

Manufacturer: Printek

Part # 92370

Availability: IN STOCK

Write a review

BRAND NEW 90 days Warranty

REFURBISHED 90 days Warranty

The FormsPro 4600 Dot Matrix Printer, with Standard Serial/Parallel Interfaces and Combined Coax-Twinax/ImagerPlus Graphics Interfaces, can solve your toughest printing problems and automate most paper-handling functions. With the 4600 you will print with greater legibility and unsurpassed reliability.

The FormsPro 4600 printer features:

A draft speed up to 530 cps, which prints a typical 1,000-character document in less than five seconds.
Auto-switching power supply-which can work domestically and internationally.
FormsPro 4600 has single set of tractors
Superior legibility-even on 9-part forms. Auto-Gap feature adjusts the printhead according to form thickness.
Easy-load, tilt-up top to simplify loading, and straight-up paper path eliminates the problem of forms buckling and jamming.
A paper jam sensor to permit reliable, unattended operation.
Optical sensor prevents printhead from printing beyond the edges of the loaded form.

FormsPro 4600 printers have 30% higher impact force than other brands, making them the preferred choice for situations where thick forms (up to 9 part) and multi-part legibility are an issue. The increased readability helps to increase the accuracy and efficiency of your staff in accounting and operations.

Print Modes

Fast Draft: 530 cps
Draft: 400 cps
Fast Draft/High Impact: 250 cps
High Impact: 200 cps
Letter Quality: 100 cps
Optical Quality: 65 cps
Graphics: 15,360 dps (emulation dependent)

Character Matrix

Fast Draft: 9 x 9 cell
Draft: 12 x 9 cell
Letter Quality: 24 x 18 cell
Optical Quality: 36 x 18 cell

Printhead

18-wire parallel array

Character Sets

Fast Draft, Draft, and Letter Quality for Epson^TM and IBM^® Proprinter
Optical Quality for OCR-A and OCR-B

Character Spacing

5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1, and 20 cpi

Line Length

13.6 inches (34.5 cm)
Software-programmable

Line Spacing

6 and 8 lpi
Software-programmable

Paper Handling

Tear Bar: Auto-Scroll allows zero tear-off distance
Auto-Gap: Adjusts printhead to form thickness
Paper Type: Fanfold, continuous forms, edge-punched, 15-lb. minimum weight for single-part paper
Sensing: Paper motion and paper out

Operator Controls

Normal Operating Mode: Online, Form Feed/Load, Form Select/Unload, and Vertical Print Adjustment

Form Parameters

Nonvolatile memory for ten forms, each supporting settings for tractor path, cpi, lpi, form length, left and right margins, top and bottom margins, unidirectional printing, slashed or non-slashed zero, language, font, high-impact on/off

Operator Indicators

LEDs for Power, Online, and Fault
2 x 16 LCD for form selection, on/off line status, and error descriptions

Ribbon

Cartridge: Nylon fabric, Möbius loop, 23 million characters

Power Requirements

Voltage: 100 to 250 VAC ±10%
Frequency: 50 to 60 Hz
Power Consumption: 60W nonprinting, 225W printing

Paper Slew Rate

12 ips, with slower rates user-selectable for difficult forms

Paper Width

2.5" to 15" (6.4 cm to 38.1 cm)

Paper Loading

Straight path, bottom-loading

Multi-Part Forms

1 to 9 parts
0.025" max. thickness

Graphics Density

60 to 240 dpi horizontally x 72 dpi vertically (emulation dependent)

Audible Noise (Draft Mode)

62 dBA

Setup (Automatic Methods)

Control panel, pluggable cloning module, or remote via Windows program

I/O Buffer

128k

Standard Interfaces

Parallel: Centronics-compatible
Serial: RS232, 300 to 19,200 baud

Optional Interfaces

IPDS/Ethernet (Factory Installed Only - allow 4-6 weeks)
TN5250
Ethernet
Wireless 802.11b/g

Software Controls

Emulation choice of Printek, Epson FX, IBM Proprinter, DEC LA120/LA210, Genicom ANSI, or Basic Bar Codes (Includes Code 39, 2 of 5, Interleaved 2 of 5. More available through Genicom emulation)

Physical Specifications