Printek Right Side Cabinet Cover, FormsPro 4600, FormsPro 4603

The Printek Right Side Cabinet Cover is a repair part for the FormsPro 4600 and the FormsPro 4603 Wide Carriage Dot Matrix Printers.

To remove the right side cabinet cover:

1. Turn the printer off and unplug the power cord.
2. Open the printer case.
3. Remove the screw near the front of the front of the printer and the center screw at the rear.
4. Close the printer case.
5. Remove the electronics cover.
6. Loosen the screw that secures the side cover to the back of the printer.
7. Remove the screw in the electronics area.
8. Open the ribbon lid and remove the screw near the front of the printer
9. Slowly move the side cover away from the printer and make sure the side cover bracket is not catching the paper motor cable near the rear.
10. When reinstalling the cover, be sure not to pinch the paper motor cable under the side cover bracket.

×

×

×

×

×

×